CrawChuck Posted March 19, 2006 Report Share Posted March 19, 2006 Wanted to show some pics of my Lazy Susan in action. This of course in the mold making mode. Really is convenient. Someday if I decide to pour I will mount the pot to that center pole and have the molds on the turning part. Quote Link to comment Share on other sites More sharing options...
GB GONE Posted March 20, 2006 Report Share Posted March 20, 2006 Now that is mold making!!!!! DO you coat your molds with Devcon or Etex??? Nice set up Craw!!!! Jim Quote Link to comment Share on other sites More sharing options...
CrawChuck Posted March 20, 2006 Author Report Share Posted March 20, 2006 Now that is mold making!!!!! DO you coat your molds with Devcon or Etex???Nice set up Craw!!!! Jim Thanks! Envirotex Lite, oven cured for a couple hours at 190 F. I've seen alot here mentioning Devcon...have never tried it. Can it be applied very thin? Quote Link to comment Share on other sites More sharing options...
GB GONE Posted March 20, 2006 Report Share Posted March 20, 2006 Devcon does not cover as thin as the Envirotex but it does not need to cure in an oven. You can thin Devcon with acetone but it still covers some of the detail in the mold to me. Jim Quote Link to comment Share on other sites More sharing options...
CrawChuck Posted March 20, 2006 Author Report Share Posted March 20, 2006 Oven cure on the Envirotex is more a convenience for me since it speeds up the cure tremendously. Don't know if it makes a difference in the function but sure saves time. Quote Link to comment Share on other sites More sharing options...
