maximusgunn Posted March 22, 2006 Report Share Posted March 22, 2006 Anyone using smooth on 00M00 30 Silicone to make molds for pouring plastics? If so any tips to using it I have been using water putty and would like to try Rubber. Thanks in advance Quote Link to comment Share on other sites More sharing options...
bassnfool Posted March 22, 2006 Report Share Posted March 22, 2006 I'm using OOMOO 25 which is the same as 30 except a shorter pot life and cure time. Have had no problems with it except letting it cure overnight seems to produce a more durable mold. Quote Link to comment Share on other sites More sharing options...
maximusgunn Posted March 23, 2006 Author Report Share Posted March 23, 2006 Thank you for the reply. What material are you using for the master, and do you use a releasing agent? Was thinking about using smooth on's plastic resin for making the masters(copies), then pouring the 0030 over it. Thanks again Quote Link to comment Share on other sites More sharing options...
bassnfool Posted March 23, 2006 Report Share Posted March 23, 2006 I've been using OoMoo as a master out of existing molds and also using existing baits as the master after spraying twice with mold release. Quote Link to comment Share on other sites More sharing options...
maximusgunn Posted March 23, 2006 Author Report Share Posted March 23, 2006 Thanks I appreciate the help Quote Link to comment Share on other sites More sharing options...
