Predator Bass Baits Posted March 23, 2006 Report Share Posted March 23, 2006 Anyone know were I can get a Stainless Steel syringe ? I used a plastic one today with my 3 K and 5 K combo 2 piece grub mold from del and it worked perfect, I was about to sell that mold because I could not pour the tail without pouring the tail first, I am a happy camper now. There is one on ebay but across the pond and it would be about $45 shipped. Quote Link to comment Share on other sites More sharing options...
nova Posted March 23, 2006 Report Share Posted March 23, 2006 You might find one at a vetrinary supply house. Quote Link to comment Share on other sites More sharing options...
wannabefishing Posted March 23, 2006 Report Share Posted March 23, 2006 or a store that sells farm supplies, taht's where i've located them here in Canada Quote Link to comment Share on other sites More sharing options...
jigmeister Posted March 23, 2006 Report Share Posted March 23, 2006 I saw Cabelas has a 4 oz. model for marinate injecting . Nickel plated brass and $25 . Quote Link to comment Share on other sites More sharing options...
Dungeonhawk5 Posted March 23, 2006 Report Share Posted March 23, 2006 so what does this do for you so that you can get the tail right, instead of pouring it in 2 steps?, just plug the hole enough and force the plastic with pressure up in to the tail? Quote Link to comment Share on other sites More sharing options...
Predator Bass Baits Posted March 24, 2006 Author Report Share Posted March 24, 2006 Just like injecting a turkey, I stuck the tip in the hole and squeezed lightly, you will feel it needing more preasure and then just let off a bit and pull the syringe out and finish the top off as you come out. I did it 10 times now with perfect baits everytime. The air is pushed out the sides of the mold as it is not a air tight mold. Quote Link to comment Share on other sites More sharing options...
Predator Bass Baits Posted March 24, 2006 Author Report Share Posted March 24, 2006 I checked the one out at bass pro, that will not work as it is a needle, it does need to have a ball end or at least a big point, the plastic one I am useing is about 1/4 round at the tip so it fit in the mold spout snug so no air or plastic passed by. I would have to go and look but it is about 120 cc or bigger ( about 4 oz full ) Quote Link to comment Share on other sites More sharing options...
Dungeonhawk5 Posted March 24, 2006 Report Share Posted March 24, 2006 if im out and about this weekend ill check bed bath and beyond.. they may have a baster type thing. in fact i know they do... Quote Link to comment Share on other sites More sharing options...
TAE73 Posted March 24, 2006 Report Share Posted March 24, 2006 How hard is it to clean it after each use? Quote Link to comment Share on other sites More sharing options...
Predator Bass Baits Posted March 24, 2006 Author Report Share Posted March 24, 2006 I sucked up about 1/8 cup of plastic in it and After I shot off 4 grubs the plastic was almost cool and It just pulled out the end and was clean, Will see what the stainless one does. Quote Link to comment Share on other sites More sharing options...
Predator Bass Baits Posted March 25, 2006 Author Report Share Posted March 25, 2006 It is a 60 cc / 3 oz, I sucked up 1 oz to pour the 4 cavities . I did order a stainless one but it is 7 oz, as that is all I could find. Does stainless hold heat better ? Quote Link to comment Share on other sites More sharing options...
robbor Posted March 27, 2006 Report Share Posted March 27, 2006 I saw a beer keg tap the other day that could easilt be convirted. Or try glass ones Quote Link to comment Share on other sites More sharing options...
nova Posted March 27, 2006 Report Share Posted March 27, 2006 I tried using a stainless steel pot once to melt plastic and it scorched much faster than aluminum; so I would suggest that it allows the heat to travel through the metal much faster. Quote Link to comment Share on other sites More sharing options...
