Jig Man Posted April 5, 2006 Report Share Posted April 5, 2006 I want to make some blades from stainless steel. I need it .010 thickness. Can anyone give me a source?? Quote Link to comment Share on other sites More sharing options...
Muskiefool Posted April 7, 2006 Report Share Posted April 7, 2006 http://www.mcmaster.com/ just type in what you are searching for they have it all good luck Quote Link to comment Share on other sites More sharing options...
davycrockett Posted January 2, 2007 Report Share Posted January 2, 2007 Check your local machine shop or metal fab shop. They sometimes will sell you scraps for cheap. Quote Link to comment Share on other sites More sharing options...
cadman Posted January 2, 2007 Report Share Posted January 2, 2007 I have some, if you can't find it, but it will probably be cheaper to buy it locally.... Quote Link to comment Share on other sites More sharing options...
longhorn Posted January 16, 2007 Report Share Posted January 16, 2007 I went to a local air conditioning/sheet metal shop and they gave me enough scraps of 22ga stainless to make about 100 blades. Since then blades have become available from Netcraft and Barlows and at 19.95 a hundred not worth my time to make them....they are a little thicker than the original Chatterbait blade but they work fine for me...they also have the pre-cut prism tape for the blades. Quote Link to comment Share on other sites More sharing options...
plop Posted February 13, 2007 Report Share Posted February 13, 2007 I will send you some of mine to try for free. All I need is a name and address. Not sure if you cutting a unique design or going for the same look as the original but mine may save you the hassle of cutting them yourself. Quote Link to comment Share on other sites More sharing options...
Jason Posted February 17, 2007 Report Share Posted February 17, 2007 http://www.onlinemetals.com/ Quote Link to comment Share on other sites More sharing options...
GotstaFish Tackle Posted June 16, 2007 Report Share Posted June 16, 2007 Does anybody know where I can buy these in bulk that are not hexagonal shaped? Quote Link to comment Share on other sites More sharing options...
cadman Posted June 17, 2007 Report Share Posted June 17, 2007 GotstaFish Tackle, If you have an idea of what you want, or you want me to design it, PM me. I can make anything you want, with any kind of profile. Ted. Quote Link to comment Share on other sites More sharing options...
VANNDALIZER Posted June 24, 2007 Report Share Posted June 24, 2007 I have six punch presses. If you want several 1000 made pm me. I would need diminsions, thickness and material type. Thanks, MAV Quote Link to comment Share on other sites More sharing options...
