earthworm77 Posted December 23, 2006 Report Share Posted December 23, 2006 Since we lost all the info on the forum, I need to throw this out there again. I have about 150 weedless bass fishing jigs and I'd like them powder painted black. Can anyone help me out and do it? I had it all set up but when the forum went down, I lost contact. So, lets try it again. Thanks Quote Link to comment Share on other sites More sharing options...
dlaery Posted December 23, 2006 Report Share Posted December 23, 2006 Hi earthworm77, What size of hook? Is it a round bend or extra wide gap? What weight of lead? Are the weed guards already in the jig? Quote Link to comment Share on other sites More sharing options...
earthworm77 Posted December 25, 2006 Author Report Share Posted December 25, 2006 All heads have weedguards. 1/2 of them have a Gammie 2/0 roundbend on 1/4oz heads and the rest have Owner Cutting points, I'd say EWG bends, not traditional round bend models, they are the angular hooks on 3/8oz heads. Quote Link to comment Share on other sites More sharing options...
jigmaster Posted December 30, 2006 Report Share Posted December 30, 2006 Hey, Craig Did you find someone to paint your heads? Regards Quote Link to comment Share on other sites More sharing options...
earthworm77 Posted December 31, 2006 Author Report Share Posted December 31, 2006 Yes I did. Thank you for asking. I had someone just before the board went down and I lost all the info. I'm now on board with the same guy. Quote Link to comment Share on other sites More sharing options...
Getbigrnet Posted March 12, 2007 Report Share Posted March 12, 2007 Has anyone tried using one of the 3 inch bubble stones thats used for fish tanks? For making a fluid bed for painting with powder paint?http://www.arcatapet.com/item.cfm?cat=9335 Looks like all you would have to do is add the 3 inch pvc pipe..and you would be good to go Quote Link to comment Share on other sites More sharing options...
