docirv Posted December 23, 2006 Report Share Posted December 23, 2006 Does this soft plastic injector really work? Quote Link to comment Share on other sites More sharing options...
nova Posted December 23, 2006 Report Share Posted December 23, 2006 Been there, done that, burnt fingers and broken clips. Pain in the butt. My opinion. Quote Link to comment Share on other sites More sharing options...
bigbass14.3 Posted December 23, 2006 Report Share Posted December 23, 2006 I agree with nova, I have them and you have to be careful cause it will burn your fingers, and it will do it often you are better to just pour by hand also very hard to do multiple colors cause the plastic sets up in the injector quickly. Quote Link to comment Share on other sites More sharing options...
millsryno Posted December 23, 2006 Report Share Posted December 23, 2006 I've heard of guys burning themselves very badly using those. I'd avoid them. Quote Link to comment Share on other sites More sharing options...
Delw Posted December 23, 2006 Report Share Posted December 23, 2006 They melt at temps around 350 degrees. then burn your hand down to the bone. DONT USE THEM Quote Link to comment Share on other sites More sharing options...
Predator Bass Baits Posted December 23, 2006 Report Share Posted December 23, 2006 I bought 2, one was broke I glued it, I tried to use them but the tip cooled and nothing ever came out. I wasted $20, If anyone likes them and uses them I have 2 to sell/trade. Quote Link to comment Share on other sites More sharing options...
dtrs5kprs Posted December 24, 2006 Report Share Posted December 24, 2006 Has anyone tried to open up the sprue on those molds with a dremel and let it rip with a large lee pot? Seems like they should not work differently than any other 2 pc mold (resin, pop, etc). Not the ideal way to pour, but might prevent the molds from being a total waste. Quote Link to comment Share on other sites More sharing options...
jmik26 Posted December 24, 2006 Report Share Posted December 24, 2006 I bought one and it cracked and spilled the plastic everywhere. I was lucky enough that it didn't burn my hands. I should have followed the advice of the TU guys! Quote Link to comment Share on other sites More sharing options...
tlyonshunter Posted January 18, 2007 Report Share Posted January 18, 2007 been there done that i tryed it once !! burnt my hand so bad a month ago it still is healing Quote Link to comment Share on other sites More sharing options...
james bradshaw Posted January 18, 2007 Report Share Posted January 18, 2007 Don't waste your time or money! I now have a big injection machine, it is the way to go, but very expensive! James Quote Link to comment Share on other sites More sharing options...
TTDuckman Posted January 18, 2007 Report Share Posted January 18, 2007 I bought 3 of the 4" stick molds with the intention of opening up the sprue. I successfully opened it cleanly on the one mold that I tried it on. I was less than happy with the baits that came out of it. Very poor quality baits. I will be sending the two unopened molds back. Tim Quote Link to comment Share on other sites More sharing options...
bassassazzin Posted January 18, 2007 Report Share Posted January 18, 2007 Those things spell: Accident Waiting To Happen!!! Purchased a few months ago and thought they were a complete pain in the a__!!!! You have to be quick or the plastic sets up.....being to quick and your quick to be burned. Not worth any pain & scars. Find another alternative. Quote Link to comment Share on other sites More sharing options...
