kbkindle Posted December 24, 2006 Report Share Posted December 24, 2006 kbkindle here glad to see tu back up i was about to have a heart attack. question in making wood crankbaits i have been useing mostly basswood and a little cedar and balsa but most basswood if i use a polyurathane sealer( by the way what is the best brand) wipe a couple coats on and then paint with waterbase createx paint and top coat with devcon. what if after i put sealer on i see a flaw little tiny hole or scratches in lure and want to make it a perfect as i can is there a sanding primer i can use that will not affect the sealer or the createx top coat could you put on a coat or two of a lacquer base primer sand and then top coat with createx. thank you and merry christmas kb kindle Quote Link to comment Share on other sites More sharing options...
KcDano Posted December 24, 2006 Report Share Posted December 24, 2006 Yes, you can shoot lacquer primer over the poly by applying light coats. For spot repair or a hole you can use lacquer spot and glazing putty. Quote Link to comment Share on other sites More sharing options...
