yankee jigger Posted December 26, 2006 Report Share Posted December 26, 2006 Have a 1/32nd and 1/16th do it mold,7 of each in one mold. Kicking around getting a couple molds for 1/4 and 3/8ths but dont want to spend too much,need money left for paints and materials. Do you guys just bite the bullet and buy the molds or do you buy bulk jigheads???????? Quote Link to comment Share on other sites More sharing options...
LedHed Posted December 26, 2006 Report Share Posted December 26, 2006 Bite the bullet and get the molds. You can make jigs when you need them. And use the hook/size that you want. Watch ebay for molds or sometimes a TU member might have what you need. Quote Link to comment Share on other sites More sharing options...
Elken Posted December 26, 2006 Report Share Posted December 26, 2006 Another option is to buy some plain jigheads from someone that already has the mold and then paint them yourself & add the skirt. Quote Link to comment Share on other sites More sharing options...
dampeoples Posted December 26, 2006 Report Share Posted December 26, 2006 You can do like I did, get the heads from someone in this thread, they'll treat you right, spend your money on paint, and save for the mold later! Quote Link to comment Share on other sites More sharing options...
yankee jigger Posted December 26, 2006 Author Report Share Posted December 26, 2006 Thanks guys,bit the bullet and bought a couple of new molds and a production melter. Quote Link to comment Share on other sites More sharing options...
