SeminoleFan Posted September 9, 2003 Report Share Posted September 9, 2003 I just made some fiberglass resin molds. Should I coat the mold cavities with Devcon to aquire the shiny coat on the plastic? just asking since I havent poured into them yet. Thanks Rick SeminoleFan Quote Link to comment Share on other sites More sharing options...
Big Splash Posted September 9, 2003 Report Share Posted September 9, 2003 A little 'worm oil' will provide release and a shine on the finished bait. Some guys are using Pam cooking spray-comes in garlic 'sent' too. Quote Link to comment Share on other sites More sharing options...
kidlizard Posted September 9, 2003 Report Share Posted September 9, 2003 I have tried Devcon on one set of molds with great results. The baits are shiny as can be, but on another set the devcon peeled on me. I dont know why, or what I did differently. I would try it on one mold and see how it works, because the results are worth the risk if it works. If you succeed let us know what you did. I think one of the molds I thinned the devcon with alchohol, but I dont know which one it was. My suspicion is that the thinned version peeled. Good luck John Quote Link to comment Share on other sites More sharing options...
