cwenbass Posted January 24, 2007 Report Share Posted January 24, 2007 I am officially hooked on pouring my own baits. I am going to pick up a stick mold from Del in a few weeks. While considering it, i was playing around with adding salt to my beavers. The problem I have, is that all the salt seems to get stuck to the bottom and not much gets in my beavers. I am not really concerned with this for my beavers however, I plan on heavily salting stick baits. What can I do to remedy this problem? Quote Link to comment Share on other sites More sharing options...
dampeoples Posted January 24, 2007 Report Share Posted January 24, 2007 You have to stir, stir, stir. Also, what type of salt? Some suspends better than others Quote Link to comment Share on other sites More sharing options...
saint308 Posted January 24, 2007 Report Share Posted January 24, 2007 Stir, stir, and then stir some more. You should stir after every other pour at least. Hope this helps. Saint. Quote Link to comment Share on other sites More sharing options...
cwenbass Posted January 24, 2007 Author Report Share Posted January 24, 2007 I use regular table salt. I have a grinder too if that helps. Quote Link to comment Share on other sites More sharing options...
saint308 Posted January 24, 2007 Report Share Posted January 24, 2007 Grinding it wouold help it suspend, but will hurt the color more. At least this is what I think. Saint. Quote Link to comment Share on other sites More sharing options...
beng Posted January 24, 2007 Report Share Posted January 24, 2007 i brought the salt delw has and i have used it and had no problems i cook the plastic add the color and flake and then reheat, then bring out and stir in the salt real good then poor Quote Link to comment Share on other sites More sharing options...
