bamabass Posted January 26, 2007 Report Share Posted January 26, 2007 how do you clean lips that have a small amount of epoxy on them? thanks Quote Link to comment Share on other sites More sharing options...
oldthunder Posted January 26, 2007 Report Share Posted January 26, 2007 If the epoxy is dry, scrap very carefully with a sharp exacto knife & blade. Be patient or you will scratch the Lexan if that is the material it is on. If the epoxy has not set, I'll use alcohol or methyl hydrate. Will not harm the Lexan. Oldthunder www.eaglelures.com Quote Link to comment Share on other sites More sharing options...
BobP Posted January 26, 2007 Report Share Posted January 26, 2007 As far as I'm concerned, after it's cured it's there forever. Up to 12-18 hrs after application, you can get it off with a Q-tip dipped in Naphta (aka lighter fluid) without harming the Lexan. Quote Link to comment Share on other sites More sharing options...
rjbass Posted January 27, 2007 Report Share Posted January 27, 2007 Bob is right, once it has cured it becomes part of the lexan. You have to make sure you get it all off before it is cured. Quote Link to comment Share on other sites More sharing options...
