etch a sketch Posted February 16, 2007 Report Share Posted February 16, 2007 hi guys does any one have a link for twin forms? or does any one here make ther own???? thanxs Etch Quote Link to comment Share on other sites More sharing options...
jerkbait Posted February 18, 2007 Report Share Posted February 18, 2007 Hey Rob If you use thin wire, you can pour 1 forms in the same mold. Twist a couple wraps of copper wire near the R-bend. I have also poured a straight looped wire in the mold and then add a U shaped wire for the blades. Barlows sells a form for double spinnerbaits that will work too.http://www.barlowstackle.com/acb/showdetl.cfm?&DID=6&Product_ID=1130&CATID=114 I sent the link so you can see how the blade arms are bent. Once they go over the shaft and up thru the loop you bend them out and they lock in real well. The easiest way is to just use 2 though. Quote Link to comment Share on other sites More sharing options...
etch a sketch Posted February 18, 2007 Author Report Share Posted February 18, 2007 thanxs jerkbait, i dont pour anything, i was just looking for a few twin buzz forms, to try an idea i have rattling around in my head, will look at your link, and see what they have, if you or anyone else is game to make me up a couple, i can swap back plugs in return, thanxs Etch Quote Link to comment Share on other sites More sharing options...
reeves Posted February 18, 2007 Report Share Posted February 18, 2007 Etch, You are looking for a buzzbait with two wire forms that will have two individual and opposite rotating blades, right? What size? Quote Link to comment Share on other sites More sharing options...
