Hookset Posted February 23, 2007 Report Share Posted February 23, 2007 Could someone tell me the basics for pouring a two color worm? I'm a rookie and was looking to do something simple like red on the bottom and back on top.........any tips would be much appreciated. Quote Link to comment Share on other sites More sharing options...
nova Posted February 23, 2007 Report Share Posted February 23, 2007 Make sure that your molds are really warm first of all. This will help to eliminate "cold cracks". The time you wait between the first color and the second color can vary depending on the finished product you are after or the effect you are trying to create. Either way the second pour has to be hot so as to make a good connection to the first color. Give it a try and play with the time between the pours until you get the effect you want. Hope this helps and show us some pics. www.novalures.com Quote Link to comment Share on other sites More sharing options...
saint308 Posted February 23, 2007 Report Share Posted February 23, 2007 If you are using a one piece, just pour your bottom color first and wait a bit, then pour your top. With a 2 piece, seperate the mold. Then pour your bottom color. Put the mold back together and pour like you normally would. Saint. Quote Link to comment Share on other sites More sharing options...
