Richoc Posted March 2, 2007 Report Share Posted March 2, 2007 Trying to repaint a bunch of jointed shad raps. Came up with the ideas to glue a bead in between the section to hold them stil during the painting. That way they would just be like working with a solid crank. Then I would just cut out the bead with a exacto. Just not working that hot the crazy glue keeps letting go. Any body holding them together to paint. This is fast high volume get them all done in in a few air brush cleaning type work. Any ideas???? Quote Link to comment Share on other sites More sharing options...
woodieb8 Posted March 2, 2007 Report Share Posted March 2, 2007 why not use a spring to hold the bait stretched out., or make a holder with 2 alligater clips. Quote Link to comment Share on other sites More sharing options...
Swede Posted March 2, 2007 Report Share Posted March 2, 2007 build a frame 10"x10" place screweyes on each side paralell to eachother attach springs from cheap pens open all springs so you can put the lureeye on it & it will stay put til your painting is done .just turn it over for other side Quote Link to comment Share on other sites More sharing options...
