savacs Posted March 7, 2007 Report Share Posted March 7, 2007 Does anyone know how to obtain a matte finish? I certainly don't, even tough i tryed to find a source that could enlighten me. Do such resins exist? Meanning: instead of getting a clear glossy finish u obtain a clear matte finish. Quote Link to comment Share on other sites More sharing options...
mark berrisford Posted March 7, 2007 Report Share Posted March 7, 2007 as i remember from an earlier post on here top coat as normal then sand with a very fine paper under a running tap was one method but i think it looks no different from a normal finish under water Quote Link to comment Share on other sites More sharing options...
bamabass Posted March 7, 2007 Report Share Posted March 7, 2007 http://www.hofcraft.com/patricianimockclearacrylicsealer.htm Spray the MATTE over your epoxy until desired matte is achevied.i also use it to apply thin coat between colors to make sure i dont mess up.you can also use the gloss for a glossy finish good luck Quote Link to comment Share on other sites More sharing options...
Jason Posted March 7, 2007 Report Share Posted March 7, 2007 Krylon sells a flat finish spray paint that you spray over the existing paint. Quote Link to comment Share on other sites More sharing options...
spare tire Posted March 8, 2007 Report Share Posted March 8, 2007 I put some dnatured alchahol on a paper towel and gave the lure a quick rub, this took the sheen off. But under the water everything looks gloss. But out of the water it gives it an older look if that is what you are after. Quote Link to comment Share on other sites More sharing options...
