civicdx Posted September 26, 2003 Report Share Posted September 26, 2003 what kind of paints do you guys recommed for painting spinnerbait heads and blades???? thanks Quote Link to comment Share on other sites More sharing options...
dtrs5kprs Posted September 26, 2003 Report Share Posted September 26, 2003 I use powder on heads, and don't paint blades. Faster to buy them painted, may add some FC clearcoat and flake then spin on the turner for a while. Powder is a little awkward but works well. Would have to go with vinyl for spraying. Quote Link to comment Share on other sites More sharing options...
Celticav Posted September 26, 2003 Report Share Posted September 26, 2003 I like acrylics, laquers, and some enamels; auto paint is fast becoming my favorite. Powder is wonderful too... Like dtrs5kprs said the powder is a little awkward though. Any kind of paint will work but its the topcoat that counts the most, your paint job doesn't even look that good till you put that topcoat on!! I use Devcon 2ton, I don't spin it, I just hang it and let it dry, any excess ends up as a long drop running down the hook shank. Flex Coat is alot thinner and probably needs the turner, but either one will do the job. JIM Quote Link to comment Share on other sites More sharing options...
civicdx Posted September 26, 2003 Author Report Share Posted September 26, 2003 i think ill stay with acrylics because i have a air brush and dont want to not use it but will try powder thanks Quote Link to comment Share on other sites More sharing options...
