NiceBass Posted April 9, 2007 Report Share Posted April 9, 2007 I have a senko mold that pours from the top.. is it possible to create a 2-tone laminate like 1 color on top, 1 color on bottom. Thanks for any help. Quote Link to comment Share on other sites More sharing options...
BBC Posted April 9, 2007 Report Share Posted April 9, 2007 yeah. This has been discussed many times (you can do a search for it). Basically, you have to pour the first color before you put the mold together (don't fill it quite the whole way and don't get too close to the spout or you won't be able to pour it correctly). Then pour the second color with the mold closed. It takes practice (especially with a 4" bait) but it can be done. Also, make sure the plastic is very hot to get them to fuse together properly. Eric Quote Link to comment Share on other sites More sharing options...
BassnG3 Posted April 9, 2007 Report Share Posted April 9, 2007 In addition to what Eric said make sure you pre-heat your mold so that both sides fuze together properly. Scott Quote Link to comment Share on other sites More sharing options...
NiceBass Posted April 9, 2007 Author Report Share Posted April 9, 2007 Alright, thankyou for the help I will try that later today. Quote Link to comment Share on other sites More sharing options...
