Jigsbydirk Posted May 4, 2007 Report Share Posted May 4, 2007 I didn't have much success searching for this so let me ask everyone. I have a lurecraft mold for ring worms and am not getting the best detail when I pour. I read in a post on here that putting some oil in the mold would help. What do you recomend? Thanks for your help. Quote Link to comment Share on other sites More sharing options...
nova Posted May 5, 2007 Report Share Posted May 5, 2007 When you say "detail" do you mean that some of the rings are not coming out? If that is the case you need to make sure the mold is warmed up and you must have you plastic hot in order for it to fill up each rib. www.novalures.com Quote Link to comment Share on other sites More sharing options...
Jigsbydirk Posted May 5, 2007 Author Report Share Posted May 5, 2007 thanks for the tip, but I have to expose my ignorance, how do I warm up the mold? Quote Link to comment Share on other sites More sharing options...
nova Posted May 5, 2007 Report Share Posted May 5, 2007 I usually pour some scrap plastic in the mold and let it set while I get the "real" plastic ready. www.novalures.com Quote Link to comment Share on other sites More sharing options...
