B BUG Posted May 16, 2007 Report Share Posted May 16, 2007 I am looking for a rod rack that I could install in my Javlin 389TE. Anyone have an idea where I could purchase something like the ones that come in newer bassboats. I would like one that has the tube on the tip end of the locker and the cradle on the reel side. Any suggestions would be greatly appreciated. Thanks,Les Quote Link to comment Share on other sites More sharing options...
empire247 Posted May 17, 2007 Report Share Posted May 17, 2007 here is a link from bass boat central where a guy made his own. you can save a few hundred dollars by making your own, somewhere on that site also i seen before where a guy used a plastic cutting board and golf club plastic tube holders to make one, anyway mabe this can give you some ideas http://www.bassboatcentral.com/jhaynesrodholder.htm Quote Link to comment Share on other sites More sharing options...
tater Posted May 17, 2007 Report Share Posted May 17, 2007 made my own also from a sheet of 1/4" plywood. took a 1" hole saw and cut out corresponding holes for 12 rods that i could fit into 2 peices of plywood cut to fit the shape of the rod box. lined the holes with felt for protection. attatched the 2 peices with threaded rod (4 total peices) with a nut and washer on each sideof the plywood with locktite to hold them in place. no drilling was required in my boat, not to mention its easy to remove if i ever need to. because of the thight fit its stable on a rough ride. Quote Link to comment Share on other sites More sharing options...
B BUG Posted May 17, 2007 Author Report Share Posted May 17, 2007 Thanks A Bunch Guys. I Thought I Might Try To Make One But Was Looking For A Quick Fix. It Sounds Like This Might Be Just As Quick To Do It Homebrew Style. Thanks Again. Quote Link to comment Share on other sites More sharing options...
