the_hide Posted October 9, 2003 Report Share Posted October 9, 2003 Anyone Used the Janns Netcraft Injector for 2 Part Molds ? I looked at their catalogue last night and was wondering if the soft plastic injector is any good. It would certainly help me get my plastisol into some tails that I just can't hand pour . Quote Link to comment Share on other sites More sharing options...
Jackllbass Posted October 9, 2003 Report Share Posted October 9, 2003 Hey Hide, I have been using them for many years and they work fine. Later<>< <>< <>< Jack Quote Link to comment Share on other sites More sharing options...
the_hide Posted October 20, 2003 Author Report Share Posted October 20, 2003 Does the injector retain plastic heat well ? Or does the nozzle clog up quickly ? Quote Link to comment Share on other sites More sharing options...
Jackllbass Posted October 21, 2003 Report Share Posted October 21, 2003 hide, The injector heats up with the plastic and stays hot, and works very well with very little clogging. Later<>< <>< <>< <>< <>< Jack Quote Link to comment Share on other sites More sharing options...
the_hide Posted October 21, 2003 Author Report Share Posted October 21, 2003 One more question jack, is there any way to control how much plastic is injected into each cavity or is it inject till it overflows and continue etc. Quote Link to comment Share on other sites More sharing options...
Jackllbass Posted October 22, 2003 Report Share Posted October 22, 2003 Hide, You can inject any amount that you want to a mold, but to fill it up you have to keep injecting until it comes out the top of the mold. Later<>< <>< <>< <>< Jack Quote Link to comment Share on other sites More sharing options...
