chadholcombe Posted July 31, 2007 Report Share Posted July 31, 2007 I was wondering which pot some of you higher volume guys are using and where is the cheapest place to get one. Thanks Quote Link to comment Share on other sites More sharing options...
ute Posted July 31, 2007 Report Share Posted July 31, 2007 if you are going to pour in volume, I recommend the RCBS. Quote Link to comment Share on other sites More sharing options...
Elken Posted July 31, 2007 Report Share Posted July 31, 2007 I use the RCBS and it works well. Quote Link to comment Share on other sites More sharing options...
BLT Posted August 1, 2007 Report Share Posted August 1, 2007 RCBS here also, but if your looking to keep your budget in check, this is not the one to get. I see on other sites people using the Lee's 4-20 pot, but if you read the specs section, it said "Note: The position of the pour spout underneath this furnace does not make it well suited for bottom pouring spinner jig molds or other molds that require wires to protrude above". In that case, they are using the pour cup/ladle and scooping out of the top. Anything over 2 oz., I pour with a ladle from a pot on a turkey fryer stand. Quote Link to comment Share on other sites More sharing options...
BLT Posted August 1, 2007 Report Share Posted August 1, 2007 Here is 2 links for the RCBS that are under $300, but I didn't check shipping. http://www.buffaloarms.com/browse.cfm/4,2483.htm http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=209097 Quote Link to comment Share on other sites More sharing options...
Elken Posted August 1, 2007 Report Share Posted August 1, 2007 I think I got mine from Midway; they had the best price I could find. Quote Link to comment Share on other sites More sharing options...
