Javelin Posted August 7, 2007 Report Share Posted August 7, 2007 Those 3D lure eyes that Nettcraft has..............do you need any type of glue to make them stick good to the spinnerbait head? Quote Link to comment Share on other sites More sharing options...
cadman Posted August 7, 2007 Report Share Posted August 7, 2007 Those eyes have self adhesive on them, however it won't hold up to the constant casting. I put Devcon 2T over all my jigs that have eyes. However, now with a tip from one of our members, I will put a drop of nail polish over the eyes, and it will spread over the eye and onto the area where the eye meets the jig. Either way that will hold them in place forever. I'm sure others will have some more tips for you. Quote Link to comment Share on other sites More sharing options...
feldermannLures Posted August 7, 2007 Report Share Posted August 7, 2007 they'll never stay on by themselves, i recommend putting some Devcon over them too. Quote Link to comment Share on other sites More sharing options...
Mr B Posted August 7, 2007 Report Share Posted August 7, 2007 Ditto what they said only I use E-Tex Mr B Quote Link to comment Share on other sites More sharing options...
reeves Posted August 7, 2007 Report Share Posted August 7, 2007 I too use the clear nail polish . It' quick, dries in seconds, inexpensive and best of all, it works. Quote Link to comment Share on other sites More sharing options...
BLT Posted August 8, 2007 Report Share Posted August 8, 2007 Sally Hansons hard as nails. Even use it for a final coat when tying tails on jigs or hooks. Quote Link to comment Share on other sites More sharing options...
smalljaw Posted August 8, 2007 Report Share Posted August 8, 2007 I use a small amount of epoxy over the eye. I stick the eye on and use a flat toothpick to apply epoxy arond the rim of the eye, have never had one come off yet. Quote Link to comment Share on other sites More sharing options...
