JeffG Posted September 2, 2007 Report Share Posted September 2, 2007 Does anyone have some balsa body half they want to sell. I am just playing around and want to save some time on making some shallow running balsa baits. I wanted to start with some balsa bodies (2 halfs) that i can make a wire thru balsa bait. Looking to make something like a D-bait but does not have to be exact. Quote Link to comment Share on other sites More sharing options...
BobP Posted September 3, 2007 Report Share Posted September 3, 2007 Don't know anywhere you can buy body halves. Easy enough to buy the bodies and split them with a razor blade, though. Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted September 3, 2007 Report Share Posted September 3, 2007 I suggest you have a go yourself, you could have made a couple while you were thinking about it. Good luck with it, whatever you decide. Report back your experiences. Quote Link to comment Share on other sites More sharing options...
Palmetto Balsa Posted September 3, 2007 Report Share Posted September 3, 2007 Jeff you have a PM. Quote Link to comment Share on other sites More sharing options...
Lure--Prof Posted September 3, 2007 Report Share Posted September 3, 2007 I suggest you have a go yourself, you could have made a couple while you were thinking about it.Good luck with it, whatever you decide. Report back your experiences. Dean Quote Link to comment Share on other sites More sharing options...
castmaster Posted September 11, 2007 Report Share Posted September 11, 2007 another easy solution is to just buy balsa half as thick as what you normally would. Cut 2 bodies out, use 2 sided tape to stick together while shaping, then take back apart for running your thru wire. Quote Link to comment Share on other sites More sharing options...
