School Master Posted September 3, 2007 Report Share Posted September 3, 2007 I'm going to buy my first mold to pour and I decided a jig trailer would probably be a good starting point. I tie my own finesse jigs and I was just wondering what trailer mold you guys think might be the best? Looking for a mold 2.5 to 3 inches long. Quote Link to comment Share on other sites More sharing options...
dampeoples Posted September 4, 2007 Report Share Posted September 4, 2007 That's pretty much a personal opinion, I've not seen any retail two piece trailer molds, so that rules that out I'll also go on to say that for a basic trailer, there's not much detail, and for personal use, a Lurecraft mold will offer you a tremendous selection, as well as value. Quote Link to comment Share on other sites More sharing options...
ottoman Posted September 4, 2007 Report Share Posted September 4, 2007 Custom Jig trailers {3/4} an... Posted By mendoza147 In Soft baits Filesize 104.8 KB Dimensions 360 x 342 Views 384 Comments 0 Rating Date March 18th, 2007 Here is a guy making some trailers that i thought looked pretty good. just my opion im not saying to copy these but this might give you a direction to go towards Quote Link to comment Share on other sites More sharing options...
jmik26 Posted September 4, 2007 Report Share Posted September 4, 2007 Speed craws make some awesome jig trailers... Quote Link to comment Share on other sites More sharing options...
earthworm77 Posted September 5, 2007 Report Share Posted September 5, 2007 You really do not need a 2 pc mold for a chunk. They are predominantly flat on one side so you can utilize a 1pc and save some coin. I'm not sure if there even is a 2pc mold. Quote Link to comment Share on other sites More sharing options...
jmik26 Posted September 5, 2007 Report Share Posted September 5, 2007 This would be a great start for you. Quote Link to comment Share on other sites More sharing options...
vishezfish Posted September 5, 2007 Report Share Posted September 5, 2007 You can make your own... I made mine out of plaster and it works great and the bass still wack em even if there not dennys pro chunk or mike ikes They do the job... And its cheap! Quote Link to comment Share on other sites More sharing options...
alsworms Posted September 5, 2007 Report Share Posted September 5, 2007 You can make your own... I made mine out of plaster and it works great and the bass still wack em even if there not dennys pro chunk or mike ikes They do the job... And its cheap! Yup......and probably one of the easiest baits out there to copy also. You don't lose much detail in copying chunks with plaster. Quote Link to comment Share on other sites More sharing options...
