http://www.basstackle.com/741_Craw_p/741-kj-1.htm

https://www.btsmolds.com/craw/709-craw-3-inch-1

Will trade for quality jigheads.

1) This will be a lure swap for handmade crankbaits,topwaters, hard jerk baits, and other like lures.

2) The lures will be made from wood, foam, or PVC.

3) The lures will be hand carved, turned on lathe, or poured into a mold.

4) Factory lures that have been repainted are not eligible for this swap.

5) The lure will be a working lure. In other words, the lure will have all of the actions that would be expected of a lure that would be fished.

6) Hooks will be removed from the lures before shipping.This will prevent the lures from being damaged during shipping.

7) There will be a maximum of 10 participants in this swap. The first ten people to sign up will be included in this swap.

OPTIONAL, BUT WOULD BE PREFERRED: Include a small piece of paper (for each lure) with the following information about the lure:

a) Name of maker and TU Username

Location (city and state or at least state) of lure maker

c) Type of material used

d) Type of paint

e) Type of clear coat (unless youhave a secret one)

9) The final commitment date is July 3, 2011 at midnight. To be included in the exchange please sign up by that date.

10) All lures will be mailed to me by July 24, 2011. I will send a PM to each participant with my mailing address.

11) Please read the TU LURE EXCHANGE RULES @ http://www.tackleunderground.com/community/topic/18601-tu-lure-exchange/ for further guidance. These rules have specific guidelines that should be followed.

12) Once I receive everyone’s lures I’ll repackage them and send them out to all of the participants.

13) Please be sure to include your shipping fees, as indicated in the above TU LURE EXCHANGE RULES (#11), with your lures.

(1) Custom made multi-segment swimbait

(2) PM me with the details of your proposed swimbait, I will approve it to keep the qualifying criteria simple, it should be in the $40-150 retail range. If you want me to share some or all of the details in this thread I will do so.

(3) Mail the exact number of baits as participants to me and include $15.00 in shipping costs (I would like to insure every package, and swimbaits are very labor intensive).

To begin, I will build a 7.75" slow sinking rainbow trout, 4 segments.

Gene

My first post was too long and I got timed out.

Would like to know if anyone is interested in working out a barter system to trade wires for soft plastic or hard lures.

Right now the rules are hard and fast for good reason there is not any common agreement on the difference of the barter value.

I have carved lures, made buzz baits and spinners and now soft plastic and yes they all have a different cost in material and labor.

I woul like to work some kind of barter value out. I can copy just about anything I see, but just not the same if someone makes it with the heart and hand, like I make my lures.

It's fun to pull out a spinner or hard lure just for grinns now and then, it would be better if there was a trade connection. when a fish is caught for the story.

Anyone else???

Basstackle Fat Hog

I want a Dels 4 inch CC Injection mold #17185

Dels Craw Mold

Thanks for looking

Thanx

Jim

Let me know if anyone is interested.

I have loads upon load of equipment for trade from a Motor Guide Bow mount 12/24 55lb thrust trolling motor on down. You may contact me @ kbonanny@gmail.com . I live in NE Pennsylvania, which would make driving distance a plus! Thanks for looking, Kirk.

My baits can be seen at:

http://mysite.verizon.net/vzey34im/backwatercustombaits2

All the jigs and buzzbaits use Mustad hooks and are either tied with stainless wire or banded, your preference. I can even do custom colors.

Thanks,

Dominic

backwater4@verizon.net